Clear Coats

Mipa 2K-HS-Klarlack matt CCM

This clearcoat with a gloss between 15-20 gloss units at a 60°-angle is a VOC-compliant High-Solid acrylic clearcoat to create high-quality matt coatings (partial or complete paintwork) on cars. It is also appropriate to adjust the gloss of Mipa 2K-HS-Klarlacke and of Mipa 2K-HS-Express-Klarlack CX 2. It guarantees a uniformly matted clear coating on solvent-based and water-based basecoats. Mipa 2K-HS-Klarlack matt CCM provides high resistance to all kind of weathering as well as to chemical and mechanical stresses.

Mipa 2K-HS-Klarlack CC 9

High-solid acryl clear coat, VOC compliant. Recommended for complete coating or for spot repairs of cars and commercial vehicles. High gloss and optimal flow for clear-over-base applications for water-borne and solvent-borne paints. Provides an optimal full hardness as well as by stoving as by drying at room temperature.

Mipa 2K-HS-Klarlack CS 90

High Quality 2K-HS-clearcoat with especially high scratch-resistance due to reflow-technology. Based on new resin technology, very easy application and ideally suited for the application on water-based basecoats. Very high resistance, excellent gloss retention.

Mipa 2K-Klarlack CA

Special 2K-clearcoat for directapplication on aluminium andnon-ferrous metals, non-yellowing.

  • MS-quality
  • Mixing ratio: 5:1 by volume
  • Hardener: Mipa H, MS
  • Thinner: Mipa 2K-Thinner

Mipa 2K-Klarlack CPE

Elastic, satin gloss 2K-MS-Klarlack to recoat especially basecoats on plastic substrates. Excellent resistance to weathering and yellowing. High mechanical and chemical resistance. The gloss level corresponds to common, reduced-gloss plastic coatings.

Mipa 2K-Express-Klarlack CX 11

Clearcoat of low viscosity for a quick and efficient refinish (Express Technology). Resistance against all environmental and climatic conditions. Excellent scratch resistance. Mixing ratio: 2:1

Mipa 2K-HS-Express-Klarlack CX 4

Innovative High Solid Expressclearcoat for an extremely fast force drying. Can be polished after only 10 minutes drying at 60° C with significant savings in time. Alternatively with drying at 40° C for only 20 minutes also energy savings are possible. Especially suited for spot repairs or partial resprays. Easy and safe application with results of highest quality.

Filler / Stopper

Mipa P 99 Multi Star

PE-high build body filler incl. hardener. For both filling and finishing, for all metal substrates, alu, zinc and fibre glass.

Mipa P 88 light green

High quality 2K-PE-finisher with low viscosity. Due to a high flowability small irregularities can be treated easily. Extremely smooth surface. Includes hardener.

Mipa P 122

Mipa P 122 is a two-component body filler of creamy consistency. The more liquid nature in combination with special filling material results in a closed, non-porous surface which is easy to sand. Mipa P 122 adheres on steel plates, zinc, aluminium, GRP and wood.

Primer / Filler

Mipa 1K-Kunststoffprimer

1K-special primer for plastic parts, adhesion promoter, transparent silver.

Mipa 1K-Haftpromoter

Colourless transparent special adhesion promoter for many plastic substrates. Can also be used on problematic substrates such as anodized Aluminium or copper without sanding. No influence on the transparency of a subsequent clearcoat.

Mipa 2K-HS-Fillprimer

2K-HS-wet-on-wet filler especially suited for an economic painting of new parts and for value-for-money repairs. Very good stability and overspray absorption, excellent flow and fast recoatability. Sandable.

Mipa 4+1 2K-HS-Acrylfiller

2K-HS-filler, application as sanding filler. Colours: White, oxide-yellow, light grey, dark grey, black

Mipa EPX 2K-EP-Express-Primer

Wet-on-wet filler on epoxy resin base. Very good flow, optimal gloss. Very fast drying and recoatability, sanding, light grey.

Other Products

Mipa Protector Set

Structured 2K-protective coating for durable, very resistant painting of transport beds (eg. pick up’s) or other highly burdened surfaces on vehicles. Can also be used as underbody protection. Application with underseal-spraygun directly out of the can.

Set includes:

  • 4 x 750 ml Mipa Protector
  • 4 x 250 ml Mipa H 10
  • Underseal-Spraygun

Mipa EP 164-20 2K EP HB Primer

Chromate-free high-build 2K epoxyprimer with zinc phosphate for steel,zinced steel, aluminium, fibreglassand mineral substrates. Suitable asprimer even for underwater andchemical protection coatings and asintermediate coating for EP zinc dustpriming coats. Especially for Airmix /Airless applications.

Ready to chat? Call us on 1800 647 228